Application

Parts kits for the retrofit of mechanical self-powered volume flow controllers or flow adjustment dampers with an actuator for the setpoint value adjustment of
CAV controllers.

Types RN, EN, VFC

• Min/max switching of the volume flow rate setpoint values
• Variable adjustment of the volume flow rate setpoint

Flow adjustment damper type VFR

• Min/Max change of the damper blade position
• Variable adjustment of the damper blade position

Parts and characteristics

Setpoint value adjustment, supply voltage and special functions of the drive variant and its adjustment range to the various basic devices (see variant description).

• Adjustment of the setpoint values to mechanical stops
• Adjustment of the setpoint values to potentiometers
• Supply voltage 24 V AC/DC or 230 V AC
• Min-max setpoint value switching with switch contact provided by others
• Variable setpoint value adjustment with signal voltage 2 – 10 V DC
• Push button to trigger a test run (only variants E01, E02, E03)
• Optional auxiliary switch, e.g. for end position sensing (only variant B52, B62, B72)

Variants

B50

• Type of actuator LM24A-F
• 24 V AC/DC supply
• Min-max switching,  mechanical adjustment
• For types RN and EN (setpoint value with angle scale)

B52

• As before but with auxiliary switch
• For types RN and EN (setpoint value with angle scale)

B60

• Type of actuator LM230A-F
• 230 V AC supply

• Min-max switching, mechanical adjustment

• For types RN and EN (setpoint value with angle scale)

B62

• Like the B60, but with auxiliary switch S2A
• For types RN and EN (setpoint value with angle scale)

B70

• Type of actuator LM24A-SR-F
• 24 V AC/DC supply
• Variable control in the range min-max with 2 – 10 V signal control voltage
• For types RN and EN (setpoint value with angle scale)

B72 

• Like the B70, but with auxiliary switch S2A
• For types RN and EN (setpoint value with angle scale)

S2  

• Retrofit of attachable auxiliary switch type S2A
• 2 adjustable switching points
• Only for variants B50, B60, B70
• For types RN and EN (setpoint value with angle scale)

E01

• Type of actuator 224-024-03-001
• 24 V AC/DC supply
• Min-max switching, adjustment with potentiometers
• For types EN (setpoint value adjustment with blue hand wheel), VFC, VFR

E02

• Type of actuator 224-230-03-002,
• 230 V AC supply
• Min-max setpoint value switching, adjustment with potentiometers
• For types EN (setpoint value adjustment with blue hand wheel), VFC, VFR

E03

• Type of actuator 224-024-03-003
• 24 V AC/DC supply
• Variable setpoint value in the range min-max, adjustment with potentiometers
• Signal voltage range 2 – 10 V
• For types EN (setpoint value adjustment with blue hand wheel), VFC, VFR

Commissioning

• Assembly actuator
• Install wiring
• Setpoint value adjustment via mechanical stops or potentiometers
• Perform test run