TFP

TFP

Easy cleaning and validation

Construction with removable spigot

Tested to VDI 6022

Getest volgens VDI 6022

For critical air cleanliness and very critical hygiene requirements, suitable for ceiling installation

Pharmaceutical clean room terminal filters as a final filter stage with Mini Pleat filter panels for the separation of suspended particles. Used in highly sensitive areas in pharmaceuticals, medicine, and biology

Mini Pleat filter panels with downstream fluid seals meet the highest hygiene requirements
Easy, time-saving, and secure filter change
Air terminal device is held in place by magnets and can be hinged down to facilitate cleaning and validation; filter change with patented turn clip
Newly designed supports for mounting in false ceilings
Robust, welded construction
Compact construction, suitable for low ceilings
Various diffuser face plates to ideally meet individual requirements
Horizontal or vertical connection
Removable spigot for installation into closed ceilings in case of horizontal connection
For air cleanliness classes 5 to 8 according to ISO 14644-1
Meets the hygiene requirements of VDI 6022

Initialize order code

General information

Application

Pharmaceutical clean room terminal filter for ceiling installation as final filter stage and for air distribution in sensitive areas of the pharmaceutical industry
Fitting of filter elements for the separation of suspended particles such as aerosols, toxic dusts, viruses, bacteria from the supply or extract air.

Variants

TC-S: Top entry circular spigot, top lateral suspension lugs
TC-FC: Top entry circular spigot, with supports for mounting in false ceilings
SC-S: Side entry circular spigot, top lateral suspension lugs
SC-FC: Side entry circular spigot, with supports for mounting in false ceilings
SCR-S: Side entry circular spigot, removable, top lateral suspension lug
SCR-FC: Side entry circular spigot, removable, with supports for mounting in false ceilings

Construction

Sheet steel, powder-coated, RAL 9010, pure white

Nominal sizes

400, 500, 600, 625 [mm]

Attachments

FD: Ceiling swirl diffuser
TDF: Ceiling swirl diffuser

Useful additions

Mini Pleat filter panels (MFP)
Suitable filter elements to be ordered separately

Special features

Compact construction
Flush ceiling installation
Removable spigot for installation into closed ceilings
Diffuser face plate can be hinged down
Filter change with patented turn clip
Supports for mounting in false ceilings

Construction features

Welded filter casing with sealing frame for fitting filter elements, with a seal on the downstream side
Mounted pressure measurement points to monitor the operating differential pressure and with internal measuring tube

Materials and surfaces

Casing and diffuser face plate made of sheet steel, powder-coated RAL 9010, pure white

Commissioning

Fitting of filter elements with a fluid seal on the downstream side
Pressing of the filter element is performed using four patented turn clips
Diffuser face plate is hinged and held in place by magnets; no additional tools required

Standards and guidelines

Hygiene meets the requirements of VDI 6022, VDI 3803, DIN 1946 Part 4, ÖNORM H 6021 and ÖNORM H 6020, SWKI VA 104-01 and SWKI 99-3, and EN 16798

Maintenance

Diffuser face plate can be hinged down to facilitate disassembly and cleaning
Particulate filter need not be removed for cleaning (seal on downstream side)
Easy change of filter elements due to special frame profile; no additional fluid sealing frame is necessary

Technical information

Function, Specification text, Order code

Schematic illustration TFP-SCR-FC

① Casing
② Removable spigot with lip seal
③ C rail for adjustable supports
④ Supports for suspended ceiling
⑤ Locknut
⑥ Adjusting screw
⑦ Suspended ceiling
⑧ Holding spring
⑨ Fluid seal
⑩ Filter pack
⑪ Air terminal device (can be hinged down)
⑫ Turn clip (patented)
⑬ Holding magnets

Pharmaceutical clean room terminal filter type TFP for ceiling installation as final filter stage and for air distribution in sensitive areas of the pharmaceutical industry. Fitting of filter elements for the separation of suspended particles such as aerosols, toxic dusts, viruses and bacteria from the supply or extract air. Welded filter casing with sealing frame for fixing the Mini Pleat filter panels, with a fluid seal on the downstream side. With side entry or top entry spigot. Side entry spigot can be removed if desired. Pressing the Mini Pleat filter panels is performed by four patented turn clips. Casing with mounted pressure measurement points to monitor the operating differential pressure and with internal measuring tube. Diffuser face plate made of sheet steel, powder-coated (RAL 9010), types FD and TDF; can be hinged down to facilitate disassembly and cleaning. Leakage test for each casing.

Special features

Compact construction
Flush ceiling installation
Removable spigot on the side for installation in closed ceilings
Air terminal device can be hinged down
Filter change with patented turn clip
Supports for mounting in false ceilings

Materials and surfaces

Casing and air terminal device made of sheet steel, powder-coated, RAL 9010, pure white

Constructions

Sheet steel, powder-coated, RAL 9010, pure white

TFP	–	SC-S	–	FD	/	600	×	198	×	330
\|		\|		\|		\|		\|		\|
1		2		3		4		5		6

1 Type
TFP Pharmaceutical clean room terminal filters

2 Variant
TC-S Top entry circular spigot, top lateral suspension lugs
TC-FC Top entry circular spigot, with supports for mounting in false ceilings
SC-S Side entry circular spigot, top lateral suspension lugs
SC-FC Side entry circular spigot, with supports for mounting in false ceilings
SCR-S Side entry circular spigot, removable, top lateral suspension lugs
SCR-FC Side entry circular spigot, removable, with supports for mounting in false ceilings

3 Air terminal device
FD
TDF

4 Nominal size [mm]
400
500
600
625

5 Spigot diameter [mm]
D

6 Casing height [mm]
G1

Variants, Dimensions

Pharmaceutical clean room terminal filter, variant TFP-TC-S

Top entry circular spigot

Product examples

TFP-TC-S, front view