WK-D-GK 

This specification text describes the general properties of the product.

Specification text
Ceiling cooling elements for simple combination with on-site plasterboard ceiling panels in all standard designs. The ceiling cooling elements consist of either a copper pipe meander or a straight copper pipe, which are connected on the carrier plate by special heat conducting rails. In order to achieve the highest quality of heat conduction, this connection is made using patented WLTÆ technology. Depending on the plasterboard ceiling, the carrier plate is designed as a plain or perforated
acoustic ceiling. The width of the ceiling cooling element is adapted to the gaps between the support profiles and its length can be configured in 50 mm increments from 600 to 5000 mm.
The ceiling cooling elements are suspended between the support profiles of the ceiling support structure, using mounting clips on the long sides. The carrier plates are designed with raised edges on the long sides so that the installation safety between the support profiles is ensured during the installation of the plasterboard panels. The pipe ends of the ceiling cooling elements are arranged to suit the design in order to realise low installation heights. Connections to each other and to the main
pipework are preferably made using flexible hoses. Depending on the maximum desired pressure losses and the ceiling structure, several ceiling cooling elements can be interconnected to form a cooling circuit.

Special characteristics

• Simple, invisible integration possible in combination with all commercially available plasterboard ceilings
• This makes the system ideal for both new buildings and retrofitting
• The special suspension technology on the support profiles ensures very simple installation with simultaneous performance assurance on site
• Joints and connections of the cooling elements can be tested for leaks on the water side by means of a pressure test before the plasterboard panels are installed
• The chilled ceiling elements enable an ideal connection and a flat construction on site thanks to different meander and connection variants
• Performance depending on the plasterboard ceiling panel used
• Positive influence on the water-side pressure loss by selecting the straight pipe design (H), especially with longer ceiling cooling elements
• Cut-outs for integration possible, for example of fixtures
• Lateral raised edges prevent the cooling elements from sliding under the support profiles (installation safety)
• Thanks to the simple and customised installation, the chilled ceiling elements are particularly suitable for small and medium-sized projects as well as individual rooms if a cooling water network is available on site

• Surface: untreated
• Underside similar to RAL9005
• Carrier plate made of aluminium (AlMg3)
• Heat conducting rails made of aluminium (AlMg3)
• Pipe meander made of copper (Cu)
• Straight pipe made of copper (Cu)
• Mounting bracket (steel)

• H: straight pipe
• G: even number of meanders
• UL: uneven number of meanders, left
• UR: uneven number of meanders, right

• 180: Water connection 180°
• 90: Water connection 90°
• No entry: straight pipe

• Length: 600 mm - 5000 mm (dimension of the cooling element)
• Intermediate sizes in increments of 50 mm possible
• Width: 263 mm and 430 mm (dimension of the cooling element)
• Height: 25 - 50 mm depending on the connection type
• Capacities, depending on the plasterboard ceiling design
• Cooling capacity DIN EN 14240 (Δt 8 K): up to 70 W/m2
• Cooling capacity (Δt 10 K): up to 89 W/m2
• Heating capacity (Δt 15 K): up to 96 W/m2
• Heating capacity (Δt 30 K): up to 204 W/m2
• Maximum operating pressure, water side: 20 bar (limitation in combination with flexible hoses, 6 bar)
• Maximum operating temperature, water side: 75 °C (with flexible hoses approx. 50 °C)