00132826_0
X-GRILLE-Basic


00117159_0.
Flat border construction


00132826_0
00117159_0.

X-GRILLE BASIC 

Ventilation grilles with flat border construction – also for continuous horizontal runs

The new X-GRILLE Basic ventilation grilles with their gently sloped border combine function with an attractive design; they can be installed in walls, sills or rectangular ducts.

  • Nominal sizes 225 × 125 – 1225 × 525 mm
  • Volume flow rate range 19 – 2651 l/s or 68 – 9544 m³/h
  • Energy-efficient and acoustically optimised air discharge
  • Symmetric blade profile for two-way entry flow
  • Uniform look and easy adjustment due to concealed blade linkage
  • Gently sloped border construction, almost completely flush with the installation surface
  • Linear look, ideal for continuous horizontal runs
  • Use of existing rear assemblies
  • Easy replacement of existing grilles due to standard installation dimensions


Optional equipment and accessories

  • Installation subframe

  • Attachments for volume flow balancing and air direction control
  • Concealed screw fixing with and without installation subframe


Updating order code
Save configuration
Calculate price
Updating technical data
  • Media
Specification text:
Updating specification text
Show complete text Hide complete text
Initialize order code

General information


Application

  • Ventilation grille of Type X-GRILLE Basic as supply air or extract air variant for comfort zones and industrial zones
  • Attractive design element for building owners and architects with demanding aesthetic requirements
  • Directed supply air discharge for mixed flow ventilation
  • Blades are adjustable to meet different local requirements
  • For variable and constant volume flows
  • For supply air to room air temperature differences from – 12 to +4 K
  • For installation in walls, sills and rectangular ducts


Special characteristics

  • Symmetric blade profile for two-way entry flow
  • Concealed blade linkage for adjusting the blades simultaneously
  • Gently sloped border construction, almost completely flush with the installation surface
  • Linear look, ideal for continuous horizontal runs


Nominal sizes

Single grille

  • Nominal length: 225, 325, 425, 525, 625, 825, 1025, 1225 mm
  • Nominal height: 125, 225, 325, 425, 525 mm

Horizontal run section

  • Nominal length of end section: 950 – 2025 mm
  • Nominal length of middle section: 2000 mm
  • Nominal height: 125, 225, 325 mm

Other dimensions upon request

Variants

  • Single grille
  • Horizontal run section

Fixing

  • VS: Concealed screw fixing
  • KF: Spring clip fixing
  • VS, KF only with installation subframe


Parts and characteristics

  • Gently sloped border
  • Horizontal blades with concealed linkage to adjust blades simultaneously
  • Vertical centre mullion for nominal lengths over 625 mm
  • Concealed screw fixing and spring clip fixing, optional


Attachments

  • AG, AS, D, DG: For volume flow rate balancing and for air direction control


Accessories

  • Installation subframe: For the fast and simple installation of ventilation grilles


Construction features

  • Only small gap between blades and front border
  • Symmetrically mounted blades


Material and surfaces

  • Front border made of galvanised sheet steel
  • Blades made of aluminium
  • Linkage and end pieces of the blades made of special high-temperature resistant plastic, according to UL 94, V-0, flame-retardant
  • Front border and blades powder-coated RAL 9010, pure white
  • AG attachment: Frame made of sheet steel, blades made of aluminium
  • AS and SAS attachment made of aluminium
  • DG attachment made of sheet steel, black powder-coated
  • P1: powder-coated, RAL CLASSIC colour


Standards and guidelines

  • Sound power level of the air-regenerated noise measured according to DIN EN ISO 5135


Maintenance

  • Low maintenance, as construction and materials are not subject to wear and tear
  • Inspection and cleaning according to VDI 6022

Technical information

  • FUNCTION
  • TECHNICAL DATA
  • SPECIFICATION TEXT
  • ORDER CODE

Ventilation grilles are air terminal devices for the supply air and extract air of ventilation and air conditioning systems. They direct the supply airflow into the room. Ventilation grilles with adjustable blades allow for adapting the discharge direction to the local conditions. The result is a mixed flow ventilation in comfort zones, with good overall room ventilation. Due to induction, the airflow velocity of the supply air flow decreases with increasing distance from the ventilation grille. The distance at which the airflow velocity reaches a certain defined value, e.g. 0.2 m/s, is called throw distance. Due to the ceiling effect, the supply airflow from wall grilles that are arranged close the ceiling achieves a greater throw distance than a comparable free jet (without ceiling effect). Single grilles, groups of grilles with certain spacing, and linear run sections all achieve different throw distances. In cooling mode, it is necessary to consider the jet deflection towards the occupied zone, which increases as the supply air to room air temperature difference increases and the discharge velocity decreases. In heating mode, the supply air jet is deflected towards the ceiling. This has no negative effect on the airflow velocity in the occupied zone, but it may affect the overall ventilation of the room.

Nominal sizes

225 × 125 – 1225 × 525 mm

Linear run section

H: 125, 225, 325 mm

minimum volume flow

16 – 568 l/s or 58 – 2045 m³/h

maximum volume flow at LWA maximum 40 dB(A) without attachments

97 – 2651 l/s or 350 – 9544 m³/h

Supply air to room air temperature difference

-12 – +4 K

Volume flow for single grilles (undivided variant) for supply air.


Geometrically free cross-section


H [mm]

L [mm]

225

325

425

525

625

825

1025

1225

Ageo [m²]

125

0.013

0.019

0.026

0.032

0.037

0.051

0.064

0.077

225

0.025

0.038

0.051

0.064

0.073

0.103

0.129

0.155

325


0.057

0.077

0.096

0.109

0.154

0.193

0.232

425



0.102

0.128

0.146

0.206

0.258

0.31

525




0.16

0.182

0.257

0.322

0.387

This specification text describes the general characteristics of the product. Texts for variants can be generated with our Easy Product Finder design programme.


Ventilation grille with gently sloped border, rectangular, for supply and extract air. Function and aesthetics combined in an appealing design. Gently sloped front border. Preferably for wall and sill installation, but also for rectangular air ducts. Ready-to-install component, consisting of a front border and symmetrically and aerodynamically shaped horizontal blades with a concealed linkage that allows the blades to be adjusted simultaneously.

Special characteristics

  • Symmetric blade profile for two-way entry flow
  • Concealed blade linkage for adjusting the blades simultaneously
  • Gently sloped border construction, almost completely flush with the installation surface
  • Linear look, ideal for continuous horizontal runs


Material and surfaces

  • Front border made of galvanised sheet steel
  • Blades made of aluminium
  • Linkage and end pieces of the blades made of special high-temperature resistant plastic, according to UL 94, V-0, flame-retardant
  • Front border and blades powder-coated RAL 9010, pure white
  • AG attachment: Frame made of sheet steel, blades made of aluminium
  • AS and SAS attachment made of aluminium
  • DG attachment made of sheet steel, black powder-coated
  • P1: powder-coated, RAL CLASSIC colour


Technical data

  • Nominal sizes: 225 × 125 to 1225 × 525 mm
  • Horizontal run section, height: 125, 225, 325 mm
  • Minimum volume flow rate (supply air): 16 – 568 l/s or 58 – 2045 m³ /h
  • Maximum volume flow rate (supply air), at LWA max. 40 dB(A) without attachments: 97 – 2651 l/s or 350 – 9544 m³ /h
  • Supply air to room air temperature difference: –12 to +4 K


Sizing data

  • qv [m³/h]
  • Δpt [Pa]

Air-regenerated noise

  • LWA [dB(A)]


Life cycle assessment

A life cycle assessment is available for the product type in the

form of an environmental product declaration (EPD), which has

been checked and published by a programme holder.

X-GRILLE-BasicAG/1025 × 125/B1/V1 / P1 - RAL 9010
||||||
123456



1 Type
X-GRILLE
Basic Single grille

2 Attachment
A without attachment (front grille only)
AG Damper unit, opposed action blades
AS Hit and miss damper
D Air direction control, blades installed at 90° to the front blades,
independently adjustable
DG Attachments D and AG combined

3 Nominal size [mm]
Specify length × height

4 Installation subframe
No entry: Without installation subframe
B1 With installation subframe

5 Fixing
VS concealed screw fixing with installation subframe
SP concealed screw fixing without installation subframe
KB without fixing material

6 Surface
No entry: powder-coated, RAL 9010 (pure white)
P1 powder-coated; specify RAL CLASSIC colour
Gloss level
RAL 9010 GU 50
RAL 9006 GU 30
All other RAL colours GU 70



Order example: X-GRILLE-Basic-AG/525×225/B1/VS/P1-RAL9016

TypeX-GRILLE Basic – Single grille
AttachmentDamper unit, opposed action blades
Nominal size [mm]Length 525, height 225
Installation subframewith installation subframe
Fixingconcealed screw fixing with installation subframe
Surfacepowder-coated, RAL 9016 (traffic white), GU 70

Downloads

product information

certificates

operation manuals

production {"x-frame-options"=>"SAMEORIGIN", "x-xss-protection"=>"1; mode=block", "x-content-type-options"=>"nosniff", "x-download-options"=>"noopen", "x-permitted-cross-domain-policies"=>"none", "referrer-policy"=>"strict-origin-when-cross-origin", "strict-transport-security"=>"max-age=31536000; includeSubDomains", "content-type"=>"text/html; charset=utf-8"}

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.

Contact

We are here for you

Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Contact

We are here for you

Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265