Gas-tight shut-off damper with pneumatic actuator
Application
Special characteristics
Nominal sizes
Variants
Constructions
Attachments
Construction features
Material and surfaces
Standards and guidelines
Maintenance
Nominal sizes | 400 × 270 – 1000 × 1000 mm |
Maximum differential pressure | 5000 Pa, in closing direction |
Closed blade air leakage | < 0.0028 (l/s)/m² or 0.01 (m³/h)/m² |
Operating temperature | 80 °C |
Supply voltage | 3~ 400 V AC, 50 Hz |
Nominal current | 0.7 A |
Current at maximum torque | 1.0 A |
Switch-on current | 3.0 A |
Torque | 60 Nm |
Actuator speed | 22 1/min |
Motor rating | 0,12 kW (S2: 15 min) |
Heating | 1~ 230 V AC, 50 Hz |
Runtime required to fully close or fully open the damper | Approx. 60 s |
Protection level actuator | IP 68 |
EC conformity | EMC to 2004/108/EU, low voltage to 2006/95/EU |
Operating temperature | -25 to 80 °C |
Weight | 20 kg |
Supply voltage | 1~ 230 V AC, 50 Hz |
Nominal current | 1.8 A |
Current at maximum torque | 2.7 A |
Switch-on current | 7.5 A |
Torque | 60 Nm |
Actuator speed | 22 1/min |
Motor rating | 0,12 kW (S2: 15 min) |
Heating | 1~ 230 V AC, 50 Hz |
Runtime required to fully close or fully open the damper | Approx. 60 s |
Protection level actuator | IP 68 |
EC conformity | EMC to 2004/108/EU, low voltage to 2006/95/EU |
Operating temperature | -25 to 80 °C |
Weight | 25 kg |
Function | Pneumatic, double acting |
Operating pressure | 6 bar |
Runtime required to fully close or fully open the damper | At least 2 s |
Air consumption | 4.4 nl/stroke |
Compressed air | Filtered |
Weight | 5 kg |
NAK: free cross section [m2]
H | B | |||
400 | 600 | 800 | 1000 | |
270 | 0.06 | 0.096 | 0.13 | 0.16 |
510 | 0.12 | 0.19 | 0.26 | 0.33 |
755 | 0.18 | 0.29 | 0.39 | 0.5 |
1000 | 0.24 | 0.38 | 0.52 | 0.66 |
Differential pressure
2 | 4 |
4 | 10 |
6 | 30 |
8 | 60 |
10 | 70 |
Rectangular shut-off dampers for shutting off ducts (gas-tight).
Level of tightness required by KTA Guideline 3601 (German Nuclear Safety Standards Commission, KTA) and by DIN 25414 even when the power supply or compressed air supply fails.
Ready-to-operate unit which consists of the casing, blades and the blade mechanism (over centre locking).
Flanges on both sides, suitable for duct connection.
Suitable for duct pressures up to 5000 Pa.
Special characteristics
Materials and surfaces
Construction
Technical data
NAK | – | P | – | G | – | R | / | 800 × 755 | / | Z05 |
| | | | | | | | | | | | |||||
1 | 2 | 3 | 4 | 5 | 6 |
1 Type
NAK Shut-off damper, gas-tight
2 Function
H Hand wheel
P Pneumatic actuator
E Electric actuator 400 V AC, 50 Hz, 3-phase
E1 Electric actuator 230 V AC, 50 Hz, 1-phase
3 Construction
No entry: duct connection without flange holes
G Duct connection with flange holes
4 Operating side
R right
L left
5 Nominal size [mm]
Specify size width × height
6 Attachments
No entry: without attachment
Z01 1 limit switch for damper blade position CLOSED
Z02 1 limit switch for damper blade position OPEN
Z03 2 limit switches for damper blade positions OPEN and
CLOSED
With pneumatic actuator (function P)
Z04 1 solenoid valve
Z05 1 solenoid valve and 1 limit switch for damper blade position
CLOSED
Z06 1 solenoid valve and 1 limit switch for damper blade position
OPEN
Z07 1 solenoid valve and 2 limit switches for damper blade positions OPEN and CLOSED
Type | NAK |
Function | Pneumatic actuator |
Variant | Duct connection with flange holes |
Operating side | right |
Nominal size [mm] | Width 800, height 755 |
Attachments | 1 solenoid valve and 1 limit switch for damper blade position CLOSED |
Share page
Recommend this page
Recommend this page by sending a link by mail.
Share page
Thank you for your recommendation!
Your recommendation has been sent and should arrive shortly.
Contact
We are here for you
Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265
Contact
Thank you for your message!
Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265
Contact
We are here for you
Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265
Contact
Thank you for your message!
Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265