small_tab1_Serie MFI
marketing_image_1
marketing_image_2
small_tab1_Serie MFI
marketing_image_1
marketing_image_2
Configure now

Type MFI

Compact construction for large volume flow rates

 

Prefilters or final filters for the separation of fine dust, or particulate filters for the most critical requirements in ventilation systems

  • Filter classes M5, M6, F7, F9, E10, E11, H13, H14
  • Performance data to EN 779 or EN 1822
  • Eurovent certification for fine dust filters
  • Meets the hygiene requirements of VDI 6022
  • High energy efficiency according to Eurovent
  • Filter media for special requirements, glass fibre papers, with spacers made of hot-melt adhesive or textile threads
  • Low initial differential pressure due to ideal pleat position and largest possible filter area
  • Compact depth construction
  • Fitting into standard cell frames for filter walls (type SIF), into mounting frames (type MF), or into universal casings (type UCA) for duct installation
v2.4.0.4
Updating order code
Save configuration
Calculate price
Filter class
ePM1
ePM10
E10
E11
H13
H14
Construction
PLA
GAL
SPC
Width
592
Height
287
490
592
Depth
292
Number of filter packs
6
8
Protection grid
PD
Seal
FNU
FND
Testing
OT
OTC
Updating technical data
Specification text: MFI-H13-GAL/592x592x292x8/FND/OT
Updating specification text

Specification text
Mini Pleat filter insert type MFI for the separation of fine dust and suspended particles such as aerosols, toxic dusts, viruses and bacteria from the supply and extract air in ventilation systems. .
Use as fine dust filters, i.e. as prefilters or final filters in ventilation systems; or as particulate filters, i.e. main or final filters for the most critical requirements of air cleanliness and sterility in areas such as industry, research, medicine, pharmaceuticals, and nuclear engineering.
Compact depth construction, suitable for systems with high volume flow rates and a requirement for long filter life.
The filter medium is made of high-quality, moisture-resistant glass fibre papers, with spacers.
Low initial differential pressure due to ideal pleat position and largest possible filter area.
Mini Pleat filter inserts available in market sizes, filter groups ISO ePM10, ISO ePM1 (fine dust filters) and EPA, HEPA (particulate filters).
As a fine dust filter (filter groups according to ISO 16890) as standard without seal, optionally available with flat seal, as a particulate filter Mini Pleat filter inserts are equipped with a flat seal.
Filter classes E11, H13 and H14 as standard with grip protection on the downstream side.
Mini Pleat filter insert as fine dust filters are certified according to Eurovent.
Mini Pleat filter inserts MFI are hygienic conform to VDI 6022.

VARIANTE
H13 Filter class: Particulate filter according to EN 1822
GAL Construction: Frame made of galvanised steel
592 Width: 592
592 Height: 592
292 Depth: 292
8 Number of filter packs: 8
Protection grid: none
FND Seal: Flat section seal on the downstream side
OT Testing: Oil mist test

PRODUCT DATA:
Volume flow qv 3.000 m³/h
Initial pressure drop Δpi 265 Pa
Filter width Bf 592 mm
Filter height Hf 592 mm
Filter depth Tf 292 mm
Filter media area Afm 30,6 m²
Nominal volume flow rate qv,nom 3.000 m³/h
Nominal initial pressure drop Δpi,nom 265 Pa

Manufacturer: TROX GmbH
Type: MFI-H13-GAL/592x592x292x8/FND/OT

Show complete text Hide complete text

Application

Application

  • Mini Pleat filter insert type MFI for the separation of fine dust and suspended particles such as aerosols, toxic dusts, viruses and bacteria from the supply and extract air in ventilation systems with large volume flow rates and the requirement for long filter life
  • Fine dust filter: Prefilter or final filter for the separation of fine dust in ventilation systems.
  • Particulate filter: Main or final filter used for the most critical requirements of air cleanliness and sterility in areas such as industry, research, medicine, pharmaceuticals, and nuclear engineering

Special characteristics

  • Leakage test is standard for all particulate filters of classes H13, H14

Description

Filter classes

  • Fine dust filters M5, M6, F7, F9
  • Particulate filters E10, E11, H13, H14

Construction

  • PLA: Frame made of plastic
  • SPC Frame made of galvanised steel, powder-coated RAL 9010, pure white

Options

  • Number of filter packs
  • FNU: Flat section seal on the upstream side
  • FND: Flat section seal on the downstream side
  • OT: Oil mist test (only for filter classes H13, H14)
  • OTC: Oil mist test with certificate (only for filter classes H13, H14)

Useful additions

  • Filter wall (SIF)
  • Mounting frame (MF)
  • Universal casing (UCA)

Construction features

  • As standard, constructions PLA and SPC used as fine dust filters have no seal.
  • Constructions PLA and SPC with optional flat section seal
  • Construction SPC as particulate filter with flat section seal. Filter classes E11, H13 and H14 with protection grid on the downstream side

Materials and surfaces

  • Filter media made of high-quality, moisture-resistant glass fibre papers, pleated
  • Spacers provide a uniform spacing of the pleats
  • Joint sealing compound made of permanently elastic two-component polyurethane adhesive
  • Frame made of plastic (option) or of galvanised sheet steel, powder-coated RAL 9010, pure white

Technical information

  • Function
  • Specification text
  • Order code
mfi

 

Mini Pleat filter insert type MFI for the separation of fine dust and suspended particles such as aerosols, toxic dusts, viruses and bacteria from the supply and extract air in ventilation systems.

Use as fine dust filters, i.e. as prefilters or final filters in ventilation systems; or as particulate filters, i.e. main or final filters for the most critical requirements of air cleanliness and sterility in areas such as industry, research, medicine, pharmaceuticals, and nuclear engineering.

Compact depth construction, suitable for systems with high volume flow rates and a requirement for long filter life.

Filter medium is made of high-quality, moisture-resistant glass fibre papers, with spacers.

Low initial differential pressure due to ideal pleat position and largest possible filter area.

Mini Pleat filter inserts are available in all commercial sizes, filter classes M5, M6, F7, F9, E10, E11, H13, H14.

As standard, fine dust filters have no seal; flat section seal as an option.

As particulate filters with flat section seal. Filter classes E11, H13 and H14 with protection grid at the side.

Mini Pleat filter inserts used as fine dust filters are certified by Eurovent and meet the hygiene requirements of VDI 6022.

Special characteristics

  • Leakage test is standard for all particulate filters of classes H13, H14

Materials and surfaces

  • Filter media made of high-quality, moisture-resistant glass fibre papers, pleated
  • Spacers provide a uniform spacing of the pleats
  • Joint sealing compound made of permanently elastic two-component polyurethane adhesive
  • Frame made of plastic (option) or of galvanised sheet steel, powder-coated RAL 9010, pure white

Construction

  • PLA: Frame made of plastic
  • SPC Frame made of galvanised steel, powder-coated RAL 9010, pure white

Sizing data

  • Filter class
  • Volume flow rate [m³/h]
  • Initial differential pressure [Pa]
  • Nominal size [mm]
mfi

Downloads

product information

certificates

operation manuals

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.

Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265