small_tab1_Serie MFC
small_tab1_Serie MFC
Configure now

Type MFC

For large volume flow rates and long filter life

 

Prefilters or final filters for the separation of fine dust, or particulate filters for the most critical requirements in ventilation systems

  • Filter classes M6, F7, F9, E11, H13, H14
  • Performance data to EN 779 or EN 1822
  • Eurovent certification for fine dust filters
  • Filter media for special requirements, made of glass fibre papers, with spacers made of textile threads
  • Low initial differential pressure due to ideal pleat position and largest possible filter area
  • Compact depth construction
  • Fitting into ducted particulate filters (types KSF, KSFS) and duct casings for particulate filters (type DCA)
v2.4.11.2
Updating order code
Save configuration
Calculate price
Filter class
ePM1
ePM10
E11
H13
H14
Construction
MDF
GAL
STA
Width
203
305
610
762
Height
610
Depth
292
Number of filter packs
6
10
Seal
WS
FNU
FND
FNB
TGU
CSU
CSD
CSB
Testing
OT
OTC
Updating technical data
Specification text: MFC-H13-MDF/610x610x292x10/FNU/OT
Updating specification text

Mini Pleat filter cells MFC for the separation of fine dust and suspended particles such as aerosols, toxic dusts, viruses and bacteria from the supply and extract air in ventilation systems. .
Use as fine dust filters, i.e. as prefilters or final filters in ventilation systems; or as particulate filters, i.e. main or final filters for the most critical requirements of air cleanliness and sterility in areas such as industry, research, medicine, pharmaceuticals, and nuclear engineering.
Compact depth V-design, suitable for systems with high volume flow rates and a requirement for long filter life.
The filter medium is made of high-quality, moisture-resistant glass fibre papers, with spacers.
Low initial differential pressure due to ideal pleat position and largest possible filter area.
Mini Pleat filter cells available in market sizes, filter groups ISO ePM10, ISO ePM1 (fine dust filters) and EPA, HEPA (particulate filters).
As standard, Mini Pleat filter cells are fitted with a perimeter flat seal on the upstream side.
Some constructions are available with an optional foamed continuous seal on one or both sides, with a test groove seal on the upstream side.
Mini Pleat filter cells used as fine dust filters are certified by Eurovent.

VARIANT
H13 Filter class: Particulate filter according to EN 1822
MDF Construction: Frame made of MDF
610 Width: 610
610 Height: 610
292 Depth: 292
10 Number of filter packs: 10
FNU Seal: Flat section seal on the upstream side
OT Testing: Oil mist test

PRODUCT DATA
Volume flow qv 3.000 m³/h
Initial pressure drop Δpi 250 Pa
Filter width Bf 610 mm
Filter height Hf 610 mm
Filter depth Tf 292 mm
Filter media area Afm 32,2 m²
Nominal volume flow rate qv,nom 3.000 m³/h
Nominal initial pressure drop Δpi,nom 250 Pa

Manufacturer: TROX GmbH
Type: MFC-H13-MDF/610x610x292x10/FNU/OT

Show complete text Hide complete text

Application

Application

  • Mini Pleat filter cell type MFC for the separation of fine dust and suspended particles such as aerosols, toxic dusts, viruses and bacteria from the supply and extract air in ventilation systems with large volume flow rates and the requirement for long filter life
  • Fine dust filter: Prefilter or final filter for the separation of fine dust in ventilation systems.
  • Particulate filter: Main or final filter used for the most critical requirements of air cleanliness and sterility in areas such as industry, research, medicine, pharmaceuticals, and nuclear engineering

Special characteristics

  • Leakage test is standard for all particulate filters of classes H13, H14

Description

Filter classes

  • Fine dust filters M6, F7, F9
  • Particulate filters E11, H13, H14

Construction

  • MDF: Frame made of MDF
  • GAL: Frame made of galvanised steel
  • STA: Frame made of stainless steel

Options

  • Number of filter packs: 3, 5, 6, 10, 12
  • HMS: Increased filter area
  • FNU: Flat section seal on the upstream side
  • FND: Flat section seal on the downstream side
  • FNB: Flat section seal on both sides
  • TGU: Test groove seal on the upstream side (only for filter classes H13, H14)
  • CSU: Continuous seal on the upstream side
  • CSD: Continuous seal on the downstream side
  • CSB: Continuous seal on both sides
  • WS: Without seal
  • OT: Oil mist test (only for filter classes H13, H14)
  • OTC: Oil mist test with certificate (only for filter classes H13, H14)

Useful additions

  • Ducted particulate filter, available as one unit (KSF, KSFS) or as a filter unit system (KSFSSP)
  • Duct casing for particulate filters (DCA)

Construction features

  • Perimeter flat section seal on the upstream side
  • Some constructions with optional foamed continuous seal or with a test groove seal (filter classes H13, H14) on the upstream side; the flat section or continuous seal can also be fitted on the downstream side or on both sides

Materials and surfaces

  • Filter media made of high-quality, moisture-resistant glass fibre papers, pleated
  • Spacers provide a uniform spacing of the pleats
  • Joint sealing compound made of permanently elastic two-component polyurethane adhesive
  • Frame made of either MDF, galvanised sheet steel, or stainless steel

Technical information

  • Technical data
  • Specification text
  • Order code
mfc

 

Mini Pleat filter cells MFC for the separation of fine dust and suspended particles such as aerosols, toxic dusts, viruses and bacteria from the supply and extract air in ventilation systems.

Use as fine dust filters, i.e. as prefilters or final filters in ventilation systems; or as particulate filters, i.e. main or final filters for the most critical requirements of air cleanliness and sterility in areas such as industry, research, medicine, pharmaceuticals, and nuclear engineering.

Compact depth construction, suitable for systems with high volume flow rates and a requirement for long filter life.

Filter medium is made of high-quality, moisture-resistant glass fibre papers, with spacers.

Low initial differential pressure due to ideal pleat position and largest possible filter area.

Mini Pleat filter cells are available in all commercial sizes, filter classes M6, F7, F9, E11, H13, H14.

As standard, Mini Pleat filter cells are fitted with a perimeter flat section seal on the upstream side.

Some constructions are available with an optional foamed continuous seal on one or both sides, with a test groove seal on the upstream side.

Mini Pleat filter cells used as fine dust filters are certified by Eurovent.

Special characteristics

  • Leakage test is standard for all particulate filters of classes H13, H14

Materials and surfaces

  • Filter media made of high-quality, moisture-resistant glass fibre papers, pleated
  • Spacers provide a uniform spacing of the pleats
  • Joint sealing compound made of permanently elastic two-component polyurethane adhesive
  • Frame made of either MDF, galvanised sheet steel, or stainless steel

Construction

  • MDF: Frame made of MDF
  • GAL: Frame made of galvanised steel
  • STA: Frame made of stainless steel

Sizing data

  • Filter class
  • Volume flow rate [m³/h]
  • Initial differential pressure [Pa]
  • Nominal size [mm]
mfc

Downloads

product information

certificates

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.

Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265