Easy

Electronic volume flow controllers of Type Easy

Quick and easy handling

Control components for VAV terminal units, to be mounted on the terminal unit for easy operation

Simplified ordering and on-site assignment to rooms as selection is based on the nominal size of the duct
Rapid volume flow rate setting without additional device
Indicator light simplifies functional checking
Proven technology of the Compact volume flow controllers
Suitable for constant and variable volume flows as well as for V_min / V_max switching

Application

Application

Electronic volume flow controllers of Type Easy are compact, all-in-one control devices for VAV terminal units
Dynamic differential pressure transducer, electronic controller, and actuator are fitted together in one casing
Suitable for different control tasks depending on how the input for the setpoint value signal is used
The output signals of the room temperature controller, central BMS, air quality controller or similar units control the volume flow rate setpoint
Override control by means of switches or relays
Volume flow rate actual value is available as linear voltage signal

Standard filtration in comfort air conditioning systems allows for use of the controller in the supply air without additional dust protection. Since a partial volume flow is passed through the transducer in order to measure the volume flow rate, please note:

With heavy dust levels in the room, suitable extract air filters must be provided.
If the air is polluted with fluff or sticky particles, or if it contains aggressive media, Easy controllers cannot be used

Application

Electronic volume flow controllers of Type Easy are compact, all-in-one control devices for VAV terminal units
Dynamic differential pressure transducer, electronic controller, and actuator are fitted together in one casing
Suitable for different control tasks depending on how the input for the setpoint value signal is used
The output signals of the room temperature controller, central BMS, air quality controller or similar units control the volume flow rate setpoint
Override control by means of switches or relays
Volume flow rate actual value is available as linear voltage signal

With heavy dust levels in the room, suitable extract air filters must be provided.
If the air is polluted with fluff or sticky particles, or if it contains aggressive media, Easy controllers cannot be used

Description

Construction

LMV-D3AL-F for LVC
227V-024T-05-013 for LVC
LMV-D3A-F for TVR
227V-024T-05-002 für TVR
227V-024T-15-002 for TVJ, TVT
SMV-D3A for TVT
LMV-D3A for TZ-Silenzio, TA-Silenzio, TVZ, TVA

Operating modes

Variable volume flow

V_min: minimum volume flow rate
V_max: maximum volume flow rate

Constant value

V_min: constant volume flow rate
V_max: 100 %

Signal voltage range

0 – 10 V DC

Parts and characteristics

Sensor for dynamic differential pressure measurements
Mechanical stops for limiting the damper blade positions
Actuators with overload protection
Release button to allow for manual operation

Construction

LMV-D3AL-F for LVC
227V-024T-05-013 for LVC
LMV-D3A-F for TVR
227V-024T-05-002 für TVR
227V-024T-15-002 for TVJ, TVT
SMV-D3A for TVT
LMV-D3A for TZ-Silenzio, TA-Silenzio, TVZ, TVA

Operating modes

Variable volume flow

V_min: minimum volume flow rate
V_max: maximum volume flow rate

Constant value

V_min: constant volume flow rate
V_max: 100 %

Signal voltage range

0 – 10 V DC

Parts and characteristics

Sensor for dynamic differential pressure measurements
Mechanical stops for limiting the damper blade positions
Actuators with overload protection
Release button to allow for manual operation

Technical information

Function, Technical data, Order code

Principe de fonctionnement – Régulateurs Easy et Compact

① Differential pressure transducer
② Actuator
③ Volume flow controller
④ Setpoint value signal

Functional description

VAV terminal units control the volume flow in a closed loop, i.e. measurement – comparison – control.

The volume flow rate is determined by measuring the differential pressure (effective pressure). For this purpose the VAV terminal unit is fitted with a differential pressure sensor.

The integral differental pressure transducer transforms the effective pressure into a voltage signal. The volume flow rate actual value is hence available as a voltage signal. The factory setting is such that 10 V DC always corresponds to the nominal volume flow rate (V_nom).

The volume flow rate setpoint value comes from a higher-level controller (e.g. room temperature controller, air quality controller, central BMS) or from switch contacts. Variable volume flow control results in a value between V_min and V_max. It is possible to override the room temperature control, e.g. by a complete shut-off of the duct.

The controller compares the volume flow rate setpoint value to the actual value and controls the integral actuator accordingly.

The volume flow rate parameters V_min and V_max can be set on potentiometers.

Volume flow control

The volume flow controller works independent of the duct pressure
Differential pressure fluctuations do not result in permanent volume flow rate changes
To prevent the control from becoming unstable, a dead band is allowed within which the damper blade does not move.
The factory set volume flow rate parameters can be altered by the customer

Functional description

VAV terminal units control the volume flow in a closed loop, i.e. measurement – comparison – control.

The volume flow rate is determined by measuring the differential pressure (effective pressure). For this purpose the VAV terminal unit is fitted with a differential pressure sensor.

The controller compares the volume flow rate setpoint value to the actual value and controls the integral actuator accordingly.

The volume flow rate parameters V_min and V_max can be set on potentiometers.

Volume flow control

The volume flow controller works independent of the duct pressure
Differential pressure fluctuations do not result in permanent volume flow rate changes
To prevent the control from becoming unstable, a dead band is allowed within which the damper blade does not move.
The factory set volume flow rate parameters can be altered by the customer

Easy controller LMV-D3AL-F

Supply voltage (AC)

24 V AC ± 20 %, 50/60 Hz

Supply voltage (DC)

24 V DC −10/+20 %

Power rating (AC)

3.5 VA max.

Power rating (DC)

2 W max.

Running time for 90°

120 – 150 s

Setpoint value signal input

0 – 10 V DC, R_a > 100 kΩ

Actual value signal output

0 – 10 V DC, 0.5 mA max.

IEC protection class

III (protective extra-low voltage)

Protection level

IP 20

EC conformity

EMC to 2014/30/EU, low voltage to 2014/35/EU

Easy controller 227V-024T-05-013

Supply voltage (AC)

24 V AC ± 20 %, 50/60 Hz

Supply voltage (DC)

24 V DC ± 20 %

Power rating (AC)

5 VA max.

Power rating (DC)

3 W max.

Running time for 90°

100 s

Setpoint value signal input

0 – 10 V DC, R_a > 100 kΩ

Actual value signal output

0 – 10 V DC, 0.5 mA max.

IEC protection class

III (protective extra-low voltage)

Protection level

IP 20

EC conformity

EMC according to 2014/30/EU

Easy controllers LMV-D3A and LMV-D3A-F

Supply voltage (AC)

24 V AC ± 20 %, 50/60 Hz

Supply voltage (DC)

24 V DC −10/+20 %

Power rating (AC)

5 VA max.

Power rating (DC)

2.5 W max.

Running time for 90°

110 – 150 s

Setpoint value signal input

0 – 10 V DC, R_a > 100 kΩ

Actual value signal output

0 – 10 V DC, 0.5 mA max.

IEC protection class

III (protective extra-low voltage)

Protection level

IP 20

EC conformity

EMC according to 2014/30/EU

Easy controller 227V-024T-05-002

Supply voltage (AC)

24 V AC ± 20 %, 50/60 Hz

Supply voltage (DC)

24 V DC ± 20 %

Power rating (AC)

5 VA max.

Power rating (DC)

3 W max.

Running time for 90°

100 s

Setpoint value signal input

0 – 10 V DC, R_a > 100 kΩ

Actual value signal output

0 – 10 V DC, 0.5 mA max.

IEC protection class

III (protective extra-low voltage)

Protection level

IP 20

EC conformity

EMC according to 2014/30/EU

Easyregler 227V-024T-15-002

Versorgungsspannung (Wechselspannung)

24 V AC ± 20 %, 50/60 Hz

Versorgungsspannung (Gleichspannung)

24 V DC ± 20 %

Anschlussleistung (Wechselspannung)

Max. 5 VA

Anschlussleistung (Gleichspannung)

Max. 3 W

Laufzeit für 90°

150 – 270 s

Eingang Sollwertsignal

0 – 10 V DC, R_a > 100 kΩ

Ausgang Istwertsignal

0 – 10 V DC, max. 0,5 mA

Schutzklasse

III (Schutzkleinspannung)

Schutzgrad

IP 20

EG-Konformität

EMV nach 2014/30/EU

Easy controller SMV-D3A

Supply voltage (AC)

24 V AC ± 20 %, 50/60 Hz

Supply voltage (DC)

24 V DC −10/+20 %

Power rating (AC)

6 VA max.

Power rating (DC)

3 W max.

Running time for 90°

110 – 150 s

Setpoint value signal input

0 – 10 V DC, R_a > 100 kΩ

Actual value signal output

0 – 10 V DC, 0.5 mA max.

IEC protection class

III (protective extra-low voltage)

Protection level

IP 20

EC conformity

EMC according to 2014/30/EU

Variants, Product details

Easy controller LMV-D3AL-F

Part number Type Type of VAV terminal unit

M466EU1

LMV-D3AL-F

LVC

M466EU2

227V-024T-05-013

LVC

M466ES1

LMV-D3A-F

TVR

M466DC3

227V-024T-05-002

TVR

A00000053055

227V-024T-15-002

TVJ, TVT

M466ES3

SMV-D3A

TVT

M466ES2

LMV-D3A

TZ-Silenzio, TA-Silenzio, TVZ, TVA

Select nominal size

The Easy principle

Electrical connection, Commissioning, Characteristics

Répartition du bornier

1 ⊥, –: Ground
2 ~, +: Supply voltage 24 V
3 w: Setpoint value signal 0 – 10 V DC
4 U: Actual value signal 0 – 10 V DC

Échelle de réglage de débit pour TVR-Easy

Chaque unité terminale VAV porte un autocollant avec une échelle de réglage de débit afin de déterminer les paramétrages sur site (voir exemple : TVR-Easy, grandeur nominale 200). Les pourcentages se rapportent à la plage de réglage qui peut être utilisé.

Commissioning

Use the potentiometer to set the minimum or maximum volume flow rate on site
Take the adjustment value from the volume flow rate scale (sticker on each VAV terminal unit)
Comply with the volume flow rate control range, do not set a volume flow rate which is below the minimum flow rate
Volume flow rate range of LVC, TVR, TZ-Silenzio, TA-Silenzio, TVZ and TVA: 10 – 100%
Volume flow rate range of TVJ and TVT: 20 – 100%
Once the VAV terminal unit has been installed and wired, and the volume flow rate has been set, the unit is ready for operation
Remove the transparent cover of the Easy controller only temporarily for wiring and commissioning

Commissioning

Use the potentiometer to set the minimum or maximum volume flow rate on site
Take the adjustment value from the volume flow rate scale (sticker on each VAV terminal unit)
Comply with the volume flow rate control range, do not set a volume flow rate which is below the minimum flow rate
Volume flow rate range of LVC, TVR, TZ-Silenzio, TA-Silenzio, TVZ and TVA: 10 – 100%
Volume flow rate range of TVJ and TVT: 20 – 100%
Once the VAV terminal unit has been installed and wired, and the volume flow rate has been set, the unit is ready for operation
Remove the transparent cover of the Easy controller only temporarily for wiring and commissioning

Characteristic of the setpoint value signal

Downloads

product information

Product Data Sheet Type Easy

Product Data Sheet 21 MB pdf

operation manuals

Installation and commissioning instruction type Easy

EASY_IM_A00000073971_V2_2020_03_DE_en Installation and commissioning instruction 1,5 MB pdf

TROX Services

Productsearch A-Z Find out quickly and simply.

TROX Easy Product Finder Fast. Reliable. Innovative.

Tour de Competence Competence - exciting staged.

By clicking the button, you allow us to provide you with an excellent website experience and easy shopping processes. These cookies include ones that are necessary for the operation of the site and for the control of our services and applications, as well as ones that are used solely for statistical purposes, for convenience settings or to display personalized content. You can decide which categories you want to allow and you can adjust the data utilisation settings based on your individual requirements. Please note that, depending on the settings that you have selected, all functionalities of the page might not be available. You can change your selection at any time.

TECHNICALLY NECESSARY

These cookies are necessary for the proper functioning of our website and cannot be disabled. As a rule, these cookies are set only in response to actions taken by you, such as setting your privacy preferences or filling the shopping cart. In addition, security-relevant functionalities or support via a dedicated webchat are integrated, including all session cookies from TROX set after you log in as a customer. You can set your browser to block these cookies or notify you about them. As a result, however, some areas of the website might not function as intended.

STATISTICS AND WEBSITE ANALYSIS

These cookies make it possible to collect data for statistics and analysis so that TROX can measure the performance of the websites visited, identify technical problems and find starting points for optimisation. They may be set by us or by third parties whose services we use on our sites. Users also help to identify, for example, which pages are used most frequently or only rarely or how people navigate between web pages. All information used by third parties is aggregated and anonymised.