Application
• Filter insert for the adsorption of gaseous odorous substances and contaminants as well as hydrocarbons or traces of inorganic compounds from the supply and recirculated air
Variants
• PF with pre-filter fleece ePM1 according to ISO 16890
Options
• FNU: Flat section seal on the upstream side
• FND: Flat section seal on the downstream side
Construction
Activated carbon filter insert:
• PLA: Frame made of plastic
Useful additions
• Filter wall (SIF)
• Universal casing (UCA)
Construction features
• As standard, construction PLA has no seal
• Some constructions are fitted with an optional flat seal on thedownstream side or upstream side
• Construction PF with pre-filter fleece ePM1 according to ISO16890
Materials and surfaces
• Granulated activated carbon with a backing layer of non-woven synthetic fibres
• Plastic frame
Parameter | Value |
Differential pressure at nominal volume flow rate without prefilter [Pa] | 65 |
Differential pressure at nominal volume flow rate with prefilter [Pa] | 100 |
Max. operating temperature [°C] | 30 |
Maximum relative humidity [%] | 60 |
Specification text
Activated carbon filter inserts for the adsorption of gaseous odorous substances and contaminants hydrocarbons or traces of inorganic compounds from the supply and recirculated air. Compact depth construction, suitable for systems with high volume flow rates and a requirement for long filter life. Activated carbon filter inserts are available in all commercial sizes. As standard, the filter inserts have no seal but can be provided with an optional flat seal on the upstream or downstream side. Activated carbon filter inserts optionally with or without prefilter fleece ePM1 according to ISO 16890.
Materials and surfaces
• Granulated activated carbon with a backing layer of non-woven synthetic fibres
• Plastic frame
Construction
Activated carbon filter insert:
• PLA: Frame made of plastic
Sizing data
• Noxious gas
• Volume flow rate [m³/h]
• Contact time [s]
• Differential pressure [Pa]
• Nominal size [mm]
ACFI | – | PF | – | PLA | / | 592 × 592 × 292 | / | FNU | ||
| | | | | | | | | | ||||||
1 | 2 | 3 | 4 | 5 |
Variant | With prefilter ePM1 65% according to ISO 16890 |
Construction | Plastic frame |
Nominal size | 592 × 592 × 292 mm |
Seal | Flat seal on the upstream side |
Share page
Recommend this page
Recommend this page by sending a link by mail.
Share page
Thank you for your recommendation!
Your recommendation has been sent and should arrive shortly.
Contact
We are here for you
Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265
Contact
Thank you for your message!
Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265
Contact
We are here for you
Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265
Contact
Thank you for your message!
Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265