TAP Product image EN
TAP-L with body
RAL 9016
TAP-L with body RAL 9016
TAP-L with body
RAL 7012
TAP-L with body RAL 7012
Prefilter MFI-ePM1 85 % EN
Prefilter MFI-ePM1 85 %
HEPA filter MFI-H13 EN
HEPA filter MFI-H13
doc_graphic_000009.png
Tested to VDI 6022

Tested to VDI 6022

TAP Product image EN
TAP-L with body
RAL 9016
TAP-L with body
RAL 7012
Prefilter MFI-ePM1 85 % EN
HEPA filter MFI-H13 EN
doc_graphic_000009.png

TROX AIR PURIFIER   

TO REDUCE THE RISK OF INFECTION BY AEROSOLS AND VIRUSES IN ENCLOSED SPACES


The TROX AIR PURIFIER filters more than 99.95% of all aerosols out of the air and is the high-performance stand-alone solution for effectively reducing the risk of infection. It operates quietly, efficiently and ensures maximum effectiveness with the highest air change rate in its class of units.

 

  • Filters more than 99.95% of aerosols out of indoor air
  • High air change rates due to volume flow rates through the unit of up to 1600 m3/h
  • Very quiet operation due to double sound attenuation
  • Low power consumption with energy-efficient motors
  • High-efficiency filter system with two filter stages
  • Maintenance-free, filter exchange after unit message
  • No specialist personnel required for commissioning
  • Long service life and efficient operation due to large filter areas
  • Intelligent air distribution

General information

Application

The TROX air purifier is used to purify atmospheric air indoors. As a stationary air purifier, the unit ensures a relevant reduction in dust and aerosol concentration in the indoor air. By using a HEPA filter H13, it filters 99.95% of all aerosols out of the air and thus effectively reduces the infection risks. The unit is used for purifying the indoor air in heavily frequented rooms. These include, for example:



  • Waiting and reception areas
  • Meeting or conference rooms
  • Schools
  • Trade fair booths
  • Dining rooms
  • Shops


Special characteristics

  • Compact construction
  • Easy operation
  • High operational reliability


Classification

  • Meets the hygiene requirements


Nominal sizes

  • Floor-mounted units L (B × H × T  644 × 2313 × 701 mm)
  • Floor-mounted units M (B × H × T 644 × 2313 × 441 mm)


Construction

  • SPC: galvanised steel powder-coated


Variants

  • P1 Surface body powder-coated, colour RAL 7012 20%
  • P2 Diffuser surface / base frame powder-coated, colour RAL 7021 20%


Parts and characteristics

  • Fan
  • Controller for adapting the air change rate
  • Filter change alert (red light)
  • Mains isolator with green light luminaire "ready for operation“


Air diffusers

  • 3-sided aligned blades


Useful additions

  • Mini Pleat filter inserts (MFI) included in delivery
  • Associated filter inserts as replacement filters must be ordered separately


Construction features

  • Prefilter stage and HEPA filter stage
  • Sound attenuator before and after fan


Materials and surfaces

  • Casing made of powder-coated sheet steel, body RAL 9016 20%, diffuser/base frame RAL 7012 20%


Standards and guidelines

  • Hygiene meets the requirements of VDI 6022, VDI 3803, DIN 1946 Part 4, ÖNORM H 6021 and ÖNORM H 6020, SWKI VA 104-01 and SWKI 99-3, and EN 13779


Maintenance

  • Filter changes and other maintenance work can only be carried out when plant operation is interrupted
  • Air filters can be easily removed and refitted for filter changes


Installation and commissioning

  • Opening the door with Allen key size 10

Technical information

Function, Technical data, Quick sizing, Order code

  • Function
  • TECHNICAL DATA
  • QUICK SIZING
  • ORDER CODE

The TROX air purifier draws indoor air into the unit at the lower air intake and feeds it to the filters. The prefilter separates coarser particles, then the HEPA filter separates the smallest suspended particles and
particles from the room air. A fan conveys the airflow through the unit and returns the filtered air to the room via the upper outlet. Placed in front of and behind the fan
Sound attenuators reduce the operating noise to a pleasant minimum. With its operation, the TROX air purifier ensures a significant reduction in particles and aerosol concentration in rooms.
By the filtering and high air change rates, the air purifier considerably reduces the amount of germs, viruses and bacteria (depending on the room size) and thus also cuts the risk of infection.


Technical data TAP EN

Low-noise, even at high air change rates

Volume flow rateSound power level of the deviceSound pressure level in the application area

Power consumption

m³/h

dB(A)

dB(A)

W

400322420
600403230
800453755
1000494195
12005345150
14005850225
16006153310


Low-noise, even at high air change rates

Volume flow rateSound power level of the deviceSound pressure level in the application area

Power consumption

m³/h

dB(A)

dB(A)

W

400383037
500423456
600453782
7004840115
8005143155
10005648256
12006052386

TAPSPCL / P1-RAL… / P2-RAL… / 400 – 1600 [m³/h]
||||||
123456

1 TypeTAP TROX AIR PURIFIERS 


2 Casing materialSPC galvanised sheet steel, powder-coated 

3 Dimensions

L Floor-mounted unit B × H × T 644 ×  2313 × 701 mm
M Floor-mounted unit B × H × T 644 ×  2313 × 441 mm 

4 Body surface
No entry required: powder-coated, colour RAL 9016 20 %

P1 powder-coated, colour RAL 7012 20 % 

5 Diffuser surface/base frame
No entry required: powder-coated, colour RAL 7012 20 %
P2 powder-coated, colour RAL 7021 20 % 

6 Operating values for factory setting
400 – 1600 m³/h applicable for dimension L

400 – 1200 m³/h applicable for dimension M    


TAP-SPC-L/1200
Casing materialgalvanised sheet steel, powder-coated
Dimensions644 × 2313 × 701 mm
Surface (body)Standard finish 9016-GE20
Colour P1 (body)RAL 9016
Gloss level (body)GE 20
Surface (diffuser/base)Standard finish 7012-GE20
Colour P1 (diffuser/base)RAL 7012
Gloss level (diffuser/base)GE 20
Volume flow rate1200 m³/h
 

Variants, Product details, Replacement filters

  • VARIANTS
  • PRODUCT DETAILS
  • REPLACEMENT FILTERS

Nominal sizes

  • Floor-mounted unit L (L x W x H  644 × 2313 × 701 mm)
  • Floor-mounted unit M (L x W x H 644 × 2313 × 441 mm)

EN MFI Product data sheet

Information about replacement filters can be found on our website and in our product data sheet


Downloads

product information

brochures

certificates

operation manuals

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.

Contact

We are here for you

Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Contact

We are here for you

Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265