ENERGY EFFICIENCY IN CLEAN ROOMS


CALCULATING LIFECYCLE COSTS AND SAVING ENERGY

Modern air handling units and systems are controlled in a demand-based manner in the present day. For example, thermal outputs and airflows are adjusted depending on the actual demand.

The energy requirement of an air handling system depends on this control. The climatic conditions occurring at the respective location have an additional influence.

Handling In order to take these effects into consideration at the design stage, TROX offers the possibility for X-CUBE air handling units to determine the life cycle costs (LCC) in an hourly step simulation for a specific air handling unit at a selectable location in the world and for an adjustable operating scenario.

The energy requirements are determined for every hour of the year with the help of weather data records. Based on these LCC calculations, the most efficient device solution can be determined for each application.

I WILL BE HAPPY TO ADVISE YOU

I WILL BE HAPPY TO ADVISE YOU ON THE TOPIC OF LIFECYCLE COSTS FOR AIR HANDLING UNITS.

Thomas Steinle
Head of Sales AHU

Phone: +49 (0) 8222 965 - 2502

To contact form

REDUCING ENERGY COSTS BY MIXING IN RECIRCULATION AIR

Enter the X-CUBE CROFCU – and with it a completely new design concept for clean rooms. The compact, factory-tested Secondary air unit for use with centralised ventilation and air conditioning systems is typically installed in false ceilings. reimbursed.

With its unique features, it meets the essential requirements on the ventilation and air conditioning of clean rooms and is especially designed for GMP class C and class D.

  • Dissipation of high thermal loads
  • Addition of fresh air as required
  • Maintenance of room pressure by integral volume flow rate control

Maximum efficiency

The quasi plug-in construction of the X-CUBE CROFCU reduces the installation time on site considerably.

Easy installation

The X-CUBE CROFCU is delivered ready to operate.A factory acceptance test ensures that each unit complies with the applicable standards and meets the requirements of the customer. All required parameters are factory set. As a consequence, only a minimum amount of time is required for commissioning and on-site tests.

Versatile and flexible

It is possible to use the X-CUBE CROFCU as a single unit or to combine several units. In conjunction with the TROX software this results in a flexible ventilation solution for clean rooms.

Loesungen_TextMedia_Crofcu-ohneSpiegel_img_01_2021_02_DE_de EN

LLC CALCULATOR FOR FILTERS: SIMPLE. SUSTAINABLE. SAVINGS.

You can find out quickly and easily what energy costs various filters incur over time. Energy costs offer the largest savings potential – up to 50% depending on the filter.

Go to the energy costs calculator for filters.

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.

Contact

We are here for you

Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Contact

We are here for you

Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265