Fire dampers

layer

FK-EU

Rectangular fire damper for the isolation of duct penetrations between fire compartments, for a variety of installation situations, available in many different sizes and constructions

  • Nominal sizes 200 × 200 – 1500 × 800 mm, in increments of 1 mm
  • Low differential pressure and sound power level
  • Explosion-proof construction (ATEX) as an option
  • Can also be used as an air transfer damper
  • Optional stainless steel casing or powder-coated casing for increased corrosion protection
  • Integration into the central BMS with TROXNETCOM
  • Universal installation options


Optional equipment and accessories

  • Electric actuator 24 V/230 V
  • Release temperature 72/95 °C
  • Duct smoke detector RM-O-3-D

read more

layer

KU-K30

Square fire damper for installation in suspended fire-resistant F30 ceilings For the isolation of duct penetrations between fire compartments, available in five nominal nominal sizes

  • Nominal sizes for diffusers sized 300 × 300 – 625 × 625 mm
  • Satisfies high ventilation requirements when combined with a diffuser
  • Coated construction meets high hygiene requirements
  • Integration into the central BMS with TROXNETCOM


Optional equipment and accessories

  • Ceiling diffusers/swirl diffusers
  • External fusible link, 72 °C
  • Electric actuator
  • Release temperature 72/95 °C

read more

layer

FKS-EU

Small rectangular fire damper for the isolation of duct penetrations between fire compartments, available in many sizes

  • Nominal sizes 200 × 100 to 800 × 200 mm
  • Low differential pressure and sound power level
  • Optional stainless steel casing or powder-coated casing for increased corrosion protection
  • Can also be used as an air transfer damper or air transfer unit
  • Integration into the central BMS with TROXNETCOM
  • Universal installation options


Optional equipment and accessories

  • Electric actuator 24 V/230 V
  • Release temperature 72/95 °C
  • Duct smoke detectors

read more

layer

FV-EU

Circular fire protection valve for the isolation of duct penetrations between fire compartments; suitable for supply air and extract air systems. They also satisfy ventilation requirements

  • Nominal sizes Ø 100, 125, 160, 200 mm
  • For installation in walls and ceilings
  • Low differential pressure and sound power level
  • Integration into the central BMS with TROXNETCOM


Optional equipment and accessories

  • Electric limit switch
  • Extension piece
  • Trim ring, circular or square

read more

layer

FKR-EU

Large circular fire damper for the isolation of duct penetrations between fire compartments, available in nine nominal sizes

  • Nominal sizes: 315 – 800 mm
  • For mortar-based installation in solid walls, ceiling slabs and lightweight partition walls
  • Dry mortarless installation into lightweight partition walls
  • Low differential pressure and sound power level
  • Flanges as an option
  • Explosion-proof construction (ATEX) as an option
  • Optional stainless steel casing or powder-coated casing for increased corrosion protection
  • Integration into the central BMS with TROXNETCOM


Optional equipment and accessories

  • Electric actuator 24 V/230 V
  • Release temperature 72/95 °C
  • Duct smoke detectors

read more

layer

KA-EU

Rectangular fire damper for use in extract air and exhaust air ducts of commercial kitchens. For the isolation of duct penetrations between fire compartments, available in 16 nominal sizes

  • Nominal sizes from 250 × 225 to 1200 × 500 mm
  • 100% free area ensures maximum safety
  • No differential pressure, low sound power level
  • Easy to clean
  • Integration into the central BMS with TROXNETCOM


Optional equipment and accessories

  • Electric blade opening actuator, 230 V
  • Control module

read more

layer

FKRS-EU

Small circular fire damper for the isolation of duct penetrations between fire compartments, available in ten nominal sizes

  • Nominal sizes: 100 – 315 mm
  • Low differential pressure and sound power level
  • Optional stainless steel casing or powder-coated casing for increased corrosion protection
  • Can also be used as an air transfer unit
  • Integration into the central BMS with TROXNETCOM
  • Universal installation options


Optional equipment and accessories

  • Electric actuator 24 V/230 V
  • Release temperature 72/95 °C
  • Duct smoke detector RM-O-3-D

read more

FK-EU - New applications for the classic, tried-and-tested Solution!

CE-certified fire protection Solutions for the whole of Europe

The rectangular FK-EU-type fire dampers are used for the isolation of duct penetrations between fire compartments; they come in many different sizes and construction variants for a variety of installation situations. Certified for years, they guarantee maximum security in a wide range of buildings.

What is new is that the FK-EU has just been tested and approved for several new applications, for instance:

- Timber Frames
- Wooden beam ceilings
- Reduced distance to celings and floors

Read more.

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.


Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265